Kyrgyzstan

English

Please Select Your Country/Language Preferences

  • Operator Interface Control Panel
  • OICP_General drawing_V3_doc
  • Operator Interface Control Panel
  • OICP_General drawing_V3_doc
Hover to magnify image or click to enlarge

Operator Interface Control Panel, OICP

The aluminium operator interface control panel, OICP, has a pre-machined hole pattern to allow for the desired fixation to a swing arm, plus a removable front plate at a IP 65 protection degree. Components can be easily fitted thanks to the removable front plate, but will also be easily accessible through a removable rear panel. Side handles on the enclosure allow for easy movement of the enclosure into the desired working position. The aluminium body will dissipate more heat than a mild steel body, which may eliminate the need for additional ventilation.

Industry Standards

CE UKCA

EAC

GOST

Print This Page
×
Thanks for your submission. A customer service agent will be in touch soon to help you further.
Details Benefits Resources Accessories
Details

Features

Specifications

Material Aluminum
Color Anthracite Gray
Finish Powder Coated
Color Code RAL 7016
Data Copied
Metric   |   Imperial

The external enclosure dimension is increased by 16.5 mm, on the side where there is a grip profile.

Benefits

Feature: Aluminium operator interface control panel, with a pre-machined hole pattern to mount onto a swing arm system, removable aluminium front plate accessory and a IP 65 protection degree.

Advantage: Components can be installed easily because of the removable front panel (supplied as an accessory) and accessible because of the removable rear panel. The enclosure's pre-machined cut-out allows the panel to be quickly mounted to the swing arm system in the field. The pre-mounted enclosure side handles allow customers to manipulate the enclosure easily when performing operations. The aluminium body will dissipate a larger amount of heat, that has been generated from the installed components.

Benefit: The enclosure reduces customer's labour cost and allows ergonomic use in the field, due to the pre-installed handles. The internal temperature of the control panel is kept low which may remove the requirement for ventilation.

Comment: The aluminium front plate (OIFP), must be ordered separately.

Resources
Accessories
Warning
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.