Filter by
Filter applied:
0
Clear filters
- Brands
- Applications
- Product Type
- Product Family
- Power
- Socket Type
- Type
- Frame Material
- Handle Type
- Number of Sockets
- Rack Height
- Width
- Works With
- Cladding Material
- Color
- Depth
- Frame Color
- Height
- Height
- Locking Type
- Mounting
- Package Quantity
- Frame Color Code
- Material
- Finish
- Cladding Color
- Color Code
- EMC Shielding
- Length
- Rack Width
- With Switch
- Cladding Color Code
- EMC Gasket Type
- Protection Rating
- For Mounting
- Thread Size
- Voltage AC
- Wall Type
- Rack Width 1
- Rack Width 2
- Door Type
- Front Finish
- Function
- Width
- Groove Width
- Access
- Rear Finish
- Rear Panel Type
- Cover Plate Type
- Cooling
- Treated Edges
- Static Load
- Complies With
- Depth
- Shock and Vibration Tolerance
- Handle Included
Products | 363 results (3018 items)
RackPower PDU, RP1xxx, 230/400 VAC, 3-phase
Modular, compact intelligent PDU with inlet metering. Ultra-Low Profile Design with only 44 mm height. Reduce IP address...
- RackPower RP1xxx Intelligent Power Distr...
- High Visibility Data Display and Interactive Graphic Display
- Measure circuit breaker loads across red...
- Enables smart load balancing for power e...
Varistar CP Perforated Door, Seismic IP20, Multi-Point Locking
- Perforated door with Multi-Point locking...
- Opening angle 180°
- Lever handle with push button
Varistar CP Seismic Cabinet, Bellcore Zone 4, EMC
- Earthquake secure up to Bellcore Zone 4,...
- Static load‐carrying capacity 1600 kg
- Type of Protection IP55
- High Shielding capability tested per IEC...
Horizontal Rail, Front, Type R-LD, Rugged, Long Lip
The rugged horizontal rail type can handle shock and vibration up to 25 g.
- Type R-LD "rugged" horizontal rails with...
- For insertion/extraction of CompactPCI or, VME64x boards
- With HP units printed from 28 HP upwards
- Length 20, 28, 40, 42, 63, 84 HP or 1000 mm
Z-Rail for Connector, DIN 41617, 31-pin
Z-rail for connector in accordance with DIN 41617, 31-pin.
- In conjunction with rear ST horizontal rails
EuropacPRO Mounting Plate for Use With Cover Plate
Mounting plate for use with cover plates.
- For installation and fixing of heavy components
- Mounting plate, full width: The mounting...
- A guide rail can be fitted in first and last slot position
- In addition to the mounting plate EMC co...
MultipacPRO 19" Chassis Basic Kit
The kit eneable a customer to configure the 3 different top / bottom covers.
- For non-standardized assemblies (1 ... 5...
- Frame consists of two lateral parts and front/rear panel
- Material: aluminium
- Select further components (Accessories)
U-profile Front Panel, Shieldable, D-Sub Cutouts
U-profile front panel with cutout for D-Sub connectors. Shieldable for textile EMC gasket.
- U-profile, front panel, Aluminum, 2.5 mm...
- For EMC textile gasket
EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding
Non-EMC shielded subrack for backplane mounting, heavy version with tox welded side panels.
- Horizontal rail type "Heavy"
- Shock and Vibration resistance up to 5 g
- IP 20, in accordance with IEC 60529
- Shock and vibration tested to the German...
Interscale Assembly Tool
The assembly tool can be used for Torx 10 screws.
- Plastic tool with bit can be used for bo...