- Brands
- Applications
- Product Type
- Product Family
- Socket Type
- Type
- Frame Material
- Handle Type
- Number of Sockets
- Rack Height
- Width
- Works With
- Cladding Material
- Color
- Depth
- Frame Color
- Height
- Height
- Locking Type
- Mounting
- Package Quantity
- Frame Color Code
- Material
- Finish
- Cladding Color
- Color Code
- EMC Shielding
- Length
- Rack Width
- With Switch
- Cladding Color Code
- EMC Gasket Type
- Protection Rating
- For Mounting
- Thread Size
- Voltage AC
- Rack Width 1
- Rack Width 2
- Front Finish
- Function
- Width
- Groove Width
- Rear Finish
- Rear Panel Type
- Cover Plate Type
- Cooling
- Treated Edges
- Static Load
- Complies With
- Depth
- Shock and Vibration Tolerance
- Handle Included
Products | 352 results (3354 items)
RackPower Basic PDU, RB0xxx, 230 VAC, 1-phase
Modular, compact PDU. Using a 1 U aluminum chassis the PDU can easily be integrated in a rack with C13 and C19 outlets.
- RackPower Basic Power Distribution Units...
- Input Voltage Range 200 - 240 VAC, 1-phase L-N
- Input connector IEC 60309 332P6
- C13 and C19 outlets
RackPower PDU, RP1xxx, 230/400 VAC, 3-phase
Modular, compact intelligent PDU with inlet metering. Ultra-Low Profile Design with only 44 mm height. Reduce IP address...
- RackPower RP1xxx Intelligent Power Distr...
- High Visibility Data Display and Interactive Graphic Display
- Measure circuit breaker loads across red...
- Enables smart load balancing for power e...
Varistar CP Cabinet Frame, Seismic Heavy Load
Welded, steel enclosure engineered specifically to protect equipment in areas with seismic activity.
- St, 1.5 mm, zinc-plated, finish: powder-coated
- Earthquake resistance to Bellcore Zone 4
- Welded heavy-duty frame with strengtheni...
- Dynamic load-carrying capacity 500 kg to IEC 61587‐2
Guide Rail Multi Piece, Mid-Piece Aluminium/Plastic Extrusion
Guide rail mid-piece for individual multi-piece guide rails out of plastic or Aluminum extrusion.
- Middle profile for mounting guide rails ...
- 2 plastic end pieces are required; these...
- Guide rails can be clipped into horizont...
- Storage temperature: from -40 °C ... 130 °C
Horizontal Rail, Front, Type L-OD, Light, Without Lip
The horizontal rail without a lip enables the use of a 6 U front panel for a subrack which is split into 2 x 3 U.
- For installation behind full-width front panel
- < 28 HP not to print
- Without lip (L-OD)
- Aluminum extrusion, anodized finish, con...
Horizontal Rail, Rear, Center, Type VT
The horizontal rail, center, type VT enables direct assembly of a backplane.
- For direct backplane mounting
- Aluminum extrusion, anodized surface, co...
Front Panel, Unshielded, Bottom Hinged
Unshielded front panel bottom hinged.
- Front panel can be unhinged at 135° (not...
- Enables mounting on horizontal rails
EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding
Non-shielded subrack for backplane mounting.
- Subrack with side panel type F ("flexibl...
- Rear horizontal rail for backplane mount...
- Aluminum construction
- IP 20, in accordance with IEC 60529
MultipacPRO 19" Chassis, Aluminum, Perforated Top and Base
This 19” chassis is a form of subrack which accepts horizontal board mounting or the mounting of non-standard components...
- Aluminum construction
- Detachable front and rear panel for easy machining
- IP 20, in accordance with IEC 60529
- Supplied as space-saving flat-pack
Horizontal Rail Type H-VT, Heavy, With EMC Gasket
The horizontal rail and the stainless steel gasket can be used to create a shielded PropacPRO Case.
- For cover plates on shielded cases
- Aluminum extrusion, anodized surface, co...
- With EMC stainless steel gasket
Front Panel With FDDI Cutouts
Front Panel, FDDI Cutout.
- Front panel with 4 FDDI cut-outs
Varistar CP Steel Door, Plain With 3-Point Locking, IP55
Steel door with mounting frame on inside, 3 point locking and with Lever handle.
- Steel door with three point locking for ...
- Lever handle with built-in push button
- Opening angle 180°