Filter by
Filter applied:
1
Clear filters
- Brands
- Applications
- Product Type
- Product Family
- Socket Type
- Type
- Frame Material
- Handle Type
- Number of Sockets
- Rack Height
- Width
- Works With
- Cladding Material
- Color
- Depth
- Frame Color
- Height
- Locking Type
- Mounting
- Package Quantity
- Frame Color Code
- Material
- Finish
- Cladding Color
- Color Code
- EMC Shielding
- Length
- Rack Width
- With Switch
- Cladding Color Code
- EMC Gasket Type
- Protection Rating
- For Mounting
- Thread Size
- Voltage AC
- Rack Width 1
- Rack Width 2
- Front Finish
- Function
- Groove Width
- Rear Finish
- Rear Panel Type
- Cover Plate Type
- Cooling
- Treated Edges
- Static Load
- Complies With
- Shock and Vibration Tolerance
- Handle Included
Filter applied: 1
Products | 323 results (2498 items)
HF Frame Type Plug-In Unit Tube Kit, Shielded, 3 U
Protects a PCB against mechanical damage and discharges electrostatic buildup; for Euroboard formats.
- With high shielding from high-frequency radiation
- To accept boards in HP grid increments
- Solid body (tube) on all sides, with cooling fins
EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding
Non-shielded subrack for Din Connector mounting EN 60603-2.
- Subrack with side panel type F ("flexibl...
- Aluminum construction
- IP 20, in accordance with IEC 60529
- Internal and external dimensions in acco...
MultipacPRO 19" Chassis, Steel, AlZn, Plain Top and Base
This 19" chassis is a form of subrack which accepts horizontal board mounting or the mounting of non-standard components...
- Steel (AIZn coated) with Al extrusion front panel
- Detachable front and rear panel for easy machining
- IP 20, in accordance with IEC 60529
- Supplied as space-saving flat-pack
Z-Rail for Connector, EN 60603-2, DIN 41612
Z-rail for connector in accordance with EN 60603-2 (DIN 41612).
- Aluminum extrusion, anodized
- Z-rails are bolted to the subrack for co...
- For connectors to EN 60603‐2 (DIN 41612)
Front Frame, Unshielded for Horizontal Boards Mounting
The Unshielded front frame covers the gaps between the subracks and assemblies.
- Front frame, Unshielded, for horizontal board mounting
EuropacPRO Perforated Rail for Connector
Perforated flat rail for connector mounting.
- In conjunction with rear horizontal rails, VT
- For Connector Mounting in accordance wit...
Front Panel With FDDI Cutouts
Front Panel, FDDI Cutout.
- Front panel with 4 FDDI cut-outs
19'' Fan Unit, 1 U, Remote Control and Monitoring
Fan Unit with ModBus interface for installation into a 1 U space within the Cabinet
- Fan speed temperature controlled
- ModBus Interface for Remote Monitoring and Control
- Temperature threshold for the fan contro...
- Signaling of fan failure and over temper...
Varistar CP Swing Frame for 600 mm Width
- For full height or partial-height mounting
- Pivot point can be selected right or left
- Can accommodate 19" chassis and 19" subr...
- 120° hinge, square locks including 2 keys
Varistar CP Seismic Base Plate, EMC, with Cable Entry, One-Piece
- Installation from outside
- Cutout at rear
- 60 mm deep
- Cable ducting with IP 55 / EMC gasket
Countersunk Screw, Torx
For screwing or riveting to PCBs.
- For screwing of Subrack or Case accessories
Horizontal Rail, Front, Type L-OD, Light, Without Lip
The horizontal rail without a lip enables the use of a 6 U front panel for a subrack which is split into 2 x 3 U.
- For installation behind full-width front panel
- < 28 HP not to print
- Without lip (L-OD)
- Aluminum extrusion, anodized finish, con...