- Brands
- Applications
- Product Type
- Product Family
- Power
- Socket Type
- Type
- Frame Material
- Handle Type
- Number of Sockets
- Rack Height
- Width
- Works With
- Cladding Material
- Color
- Depth
- Frame Color
- Height
- Height
- Locking Type
- Mounting
- Package Quantity
- Frame Color Code
- Material
- Finish
- Cladding Color
- Color Code
- EMC Shielding
- Length
- Rack Width
- With Switch
- Cladding Color Code
- EMC Gasket Type
- Protection Rating
- For Mounting
- Thread Size
- Voltage AC
- Wall Type
- Rack Width 1
- Rack Width 2
- Door Type
- Front Finish
- Function
- Width
- Groove Width
- Access
- Rear Finish
- Rear Panel Type
- Cover Plate Type
- Cooling
- Treated Edges
- Static Load
- Complies With
- Depth
- Shock and Vibration Tolerance
- Handle Included
Products | 362 results (3007 items)
Varistar CP Base Plate With Cable Entry
- Installation from outside
- Cutout at rear
- 60 mm deep
- Cable ducting with IP 55 / EMC gasket
RackPower PDU, RP2xxx, 230 VAC, 1-phase
Modular, compact intelligent PDU with inlet metering and remote outlet switching. Ultra-Low Profile Design with only 50 ...
- RackPower RP2xxx Intelligent Power Distr...
- High Visibility Data Display and Interactive Graphic Display
- Measure circuit breaker loads across red...
- Enables smart load balancing for power e...
RackPower Rope Leak Detection Sensor
Rope Fluid Leak Sensor to detect leak along a pipe / area for nVent SCHROFF RackPower PDU's.
- Rope Fluid Leak Sensor to detect leak along a pipe / area
- 1.8 m Connection Cable and 0.4 m Rope Leak Connection cable
- For RackPower RP1xxx, RP2xxx, RP6xxx Series PDU's
- Hot pluggable for easy integration
Rack Safety Plus, 3 U, 208 / 240 V AC
The power distribution box is intended to supply AC mains power and 24 V DC power to electrical or electronic devices as...
- 19“, 3 U Power Distribution Unit with Em...
- Supplies AC mains power to electrical or...
- 208 V phase to phase or phase to neutral...
- AC outputs with different connector type...
Horizontal Rail, Front, Type R-LD, Rugged, Long Lip
The rugged horizontal rail type can handle shock and vibration up to 25 g.
- Type R-LD "rugged" horizontal rails with...
- For insertion/extraction of CompactPCI or, VME64x boards
- With HP units printed from 28 HP upwards
- Length 20, 28, 40, 42, 63, 84 HP or 1000 mm
Z-Rail for Connector, DIN 41617, 31-pin
Z-rail for connector in accordance with DIN 41617, 31-pin.
- In conjunction with rear ST horizontal rails
EuropacPRO Mounting Plate for Use With Cover Plate
Mounting plate for use with cover plates.
- For installation and fixing of heavy components
- Mounting plate, full width: The mounting...
- A guide rail can be fitted in first and last slot position
- In addition to the mounting plate EMC co...
MultipacPRO 19" Chassis Basic Kit
The kit eneable a customer to configure the 3 different top / bottom covers.
- For non-standardized assemblies (1 ... 5...
- Frame consists of two lateral parts and front/rear panel
- Material: aluminium
- Select further components (Accessories)
U-profile Front Panel, Shieldable, D-Sub Cutouts
U-profile front panel with cutout for D-Sub connectors. Shieldable for textile EMC gasket.
- U-profile, front panel, Aluminum, 2.5 mm...
- For EMC textile gasket
EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding
Non-EMC shielded subrack for backplane mounting, heavy version with tox welded side panels.
- Horizontal rail type "Heavy"
- Shock and Vibration resistance up to 5 g
- IP 20, in accordance with IEC 60529
- Shock and vibration tested to the German...
Interscale Assembly Tool
The assembly tool can be used for Torx 10 screws.
- Plastic tool with bit can be used for bo...
MultipacPRO Cover Plate, Perforated
Cover plates will close the 19" chassis on top and bottom side.
- Perforated cover plates can be used as e...
- Cover plate, perforated, hole diameter 4...