DIN 3 Rail with Self-Adhesive
Hover to magnify image or click to enlarge
DIN 3 Rail with Self-Adhesive
DIN 3 Rail with Self-Adhesive is designed to directly mount small DIN rail mountable components or use as DIN 3 rail holder. Use in tight spaces where installation of a DIN rail is not possible. Industrial grade adhesive is used to avoid hole drilling with fast installation. Each unit can hold up to 1.1 lbs. (500g) in weight. Fasteners may be used for increased load rating. DIN 3 Rail with Self-adhesive can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except polyethylene, polypropylene and rubber). The surfaces must be dry and free from dust, oil, separating agents and other contamination.
Estándares del sector
Material conforms to UL 94V-0
Thanks for your submission. A customer service agent will be in touch soon to help you further.
Detalles
Recursos
Características
- DIN 3-style, symmetrical
- Constructed from UL 94V-0 rated black plastic
- Each unit can hold 1.1 lbs. (500g) after a 24-hour waiting period
- Mounting self-adhesive (non-aging, high-performance adhesive strip)
- Optional screw mount; five 10-32/M5 screws are provided
- Hole pattern 0.5 in. (12.8 mm) distance, Ø 0.14 in. (3.6mm)
- Five self-adhesive DIN rails per kit
- Operating / Storage temperature -49 F to +158 F (-45 C to 70 C)
Especificaciones
Certificado de agencia de homologación
- Advertencia
- Los productos nVent deben instalarse y usarse solo como se indica en las hojas de instrucciones y materiales de capacitación del producto nVent. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. La instalación incorrecta, el mal uso, la aplicación incorrecta u otras fallas en el seguimiento completo de las instrucciones y advertencias de nVent pueden causar el mal funcionamiento del producto, daños a la propiedad, lesiones corporales graves y la muerte y/o anular la garantía.