Hong Kong

中文

Please Select Your Country/Language Preferences

  • Thermostat
  • ETR200_General_Drawing
  • Thermostat
  • ETR200_General_Drawing
Hover to magnify image or click to enlarge

Thermostat, ETR200

This adjustable temperature thermostat, ETR200, for any enclosure, with either a normally open (NO) and normally closed (NC) contact, is used to control installed devices. Such devices could be a filter fan or a fan heater, that should turn on or off at the required temperature level, set by the user. The result is reduced operational cost. The product's versatility is high, since either cooling or heating can be controlled by the two different types of contacts that are housed within the same thermostat.

工业标准

符合 UL 508A 认证 元件

cULus_UL Listed

CE

EAC

打印本页
×
Thanks for your submission. A customer service agent will be in touch soon to help you further.
详情 优势 资源
详情

功能

技术参数

已复制数据
公制   |   英制
优势

Feature: Adjustable temperature thermostat, with a normally open (NO) and normally closed (NC) contact.

Advantage: The thermostat allows energy to flow to a device when the set temperature has been exceeded through the normally open contact (normally a cooling device), or when the internal temperature has dropped below the same set temperature through the normally closed contact (normally a heater). Customers are able to adjust the thermostat's temperature settings when equipment with special requirements are installed, such as batteries. The thermostat can only control one device at a time.

Benefit: The installed devices, such as filter fans or fan heaters, automatically turn on or off when they are required, which reduces the operational cost of the control panel. As the two different types of contacts are housed within the same thermostat either cooling or heating can be controlled, increasing the products versatility which reduces the amount of stock customers need to keep. Customers can adjust the required temperature, which means it can be installed in any enclosure.

Comment: The normally open contact, is used to control cooling or high temperature alarms, and the normally closed contact, is used to control heating. The thermostat can only be set to one temperature, this temperature will therefore control the contacts, which means that only one device can be connected, however it can be used with either cooling or heating devices.

资源
警告
应仅根据 nVent 的产品说明书与培训材料安装并使用 nVent 的产品。可访问 www.nvent.com 获取说明书，或者向您的 nVent 客服代表索取。错误安装、使用不当、滥用或未能完全遵守 nVent 的说明与警告，可能会造成产品故障、财产损失、严重的人身伤害及死亡和/或使得保修服务无效。