Trykkompenseringsenhed i rustfrit stål, EDAS
Trykkompenseringsenhed i rustfrit stål, EDAS
En trykudligningsprop udligner det tryk, som opstårpga. temperaturforskelle inde i skabet, med omgivelsernes tryk. Dette reducerer risikoen for, at der kommer støv ind i skabet.
Branchestandarder
CE
UKCA
Thanks for your submission. A customer service agent will be in touch soon to help you further.
Oplysninger
Fordele
Ressourcer
Tilbehør
Funktioner
- Beskrivelse: Kompenserer trykket med høj IP. Differenstryk kan forekomme under ekstreme temperatursvingninger, når dette sker er der risiko for støv og fugtighed inde i kabinettet. Selv med et lille overtryk sikrer en vandtæt membran at luft og fugt kommer væk fra skabet. I modsat retning tillader den kun tør luft at trænge ind i skabet. Montering med M40x1.5 med møtrik, anbefalet drejningsmoment på 5 Nm (maks. 10 Nm). For optimal trykudligning anbefaler vi at bruge to enheder på hver sin side mod toppen af kabinettet. Luft permeabilitet på 1200 l/h ved et differenstryk på min 70 mbar.
- Materiale: AISI 303 rustfrit stål. Tætningspakning NBR.
- Driftstemperatur: -45 °C til +80 °C.
- Bearbejdning påkrævet: Ø 40.5 mm. Skabsdybde ca 9 mm.
- Tæthedsgrad: IP 66 / IP X9K.
- Godkendelser: CE.
- Overfladebehandling: Rustfrit stål.
- Pakke størrelse: 1 stk.
- It is highly recommended to install two plugs per enclosure for optimal pressure compensation
- The plugs should be installed both at the top of the enclosure but on opposite sides
- It compensates the pressure with high IP
- In the enclosures pressure differentials can occur during extreme temperature variations, when this happens there is risk of dust and humidity inside the enclosure
- Even with a slight overpressure, a waterproof membrane inside the plug allows air and humidity to leave the enclosure
- In the opposite direction, it only allows dry air into the enclosure
- Mounting with thread M40x1.5 with nut, recommended torque of 5 Nm (max. 10 Nm)
- For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure
- Air permeability of 1200 l/h at a pressure difference of min. 70 mbar
- Operating temperature: -45 °C to +80 °C
- Machining required: Round hole 40.5 mm diameter; depth in the enclosure of approximately 9 mm
Specifikationer
Godkendelsesmyndigheds certifikat
Installationsvejledning / instruktionsark
- Warning
- nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.