Varmeblæser, EHV
Varmeblæser, EHV
Denne højtydende varmeblæser, EHV, har høj varmekapacitet. Det har en blæser til at fordele varmen jævnt i hele skabet, hvilket betyder, at "hot spots" kan undgås. Kondensvand elimineres, også når omgivelsestemperaturen falder drastisk.
Branchestandarder
cRUus_UL
CE
EAC
Thanks for your submission. A customer service agent will be in touch soon to help you further.
Oplysninger
Fordele
Ressourcer
Tilbehør
Funktioner
- Beskrivelse: Højtydende pladsbesparende varmeblæser for at hindre kondensdannelse. Ventilatoren bistår den naturlige konvektion for hurtig distribution af varmen i større kapslinger. Monteringsclipsen til 35 mm DIN-skinne (EN60715). Temperatur sikkerhedsudskæring til at beskytte mod overophedning i tilfælde af blæsersvigt
- Varme element: Højtydende varmeelement.
- Materiale: Plastic ifølge UL94 V-0
- Levetid på blæsere: 50.000 t ved 25 °C.
- Driftstemperatur: -45 °C til +70 °C.
- Tilslutning: 3-pol skrueklemmer 2.5 mm².
- Tæthedsgrad: IP 20, Klasse I (jordet).
- Godkendelser: CE
- Pakke størrelse: 1. stk.
- Pack quantity: 1 piece
- High performance fan heater with a high heating capacity
- The large amount of heat generated by the optimised sized heater is distributed within the enclosure using forced air, produced by the heater's fan
- When installed, water condensation will be avoided especially in situations when the ambient temperature dramatically drops
- As the air will be distributed by the integrated fan, hot spots within the enclosure will be prevented
- A thermostat with a normally closed contact, ETR or EFR, is recommended in order to control the heater
- Voltage (V): 230 V AC 50/60 HZ
- Protection: IP 20, Class I (earthed)
Specifikationer
Godkendelsesmyndigheds certifikat
Installationsvejledning / instruktionsark
- Warning
- nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.